Table of Contents
Advertisement
NetVanta 1535P Hardware Installation Guide
Rear Panel Interfaces
Power Connection
The NetVanta 1131 has a power input (labeled POWER) to the
to
Powering the NetVanta 1131 and the NetVanta Switch on page 37
Redundant Power Connections
The rear panel contains three RPS receptacles labeled RPS1, RPS2, and RPS3 that can be connected
to NetVanta switches using the NetVanta 1131 RPS cable P/N 1700532F1 (purchased separately).
Extended Power Connection
The rear panel contains one EPS receptacle labeled EPS that can be connected to NetVanta switches
using the NetVanta 1131 EPS cable P/N 1700533F1 (purchased separately).
LED Behaviors
The following table describes LED activity for the NetVanta 1131 RPS/EPS.
LED
Power
Off
Green (solid)
RPS ALM
Off
Red (solid)
EPS ALM
Off
Red (solid)
FAN ALM
Off
Red (solid)
RPS CONN (1 - 3)
Off
Green (solid)
RPS STAT (1 - 3)
Off
Amber (solid)
Amber (flashing)
EPS CONN
Off
Green (solid)
61702595G10-34C
Table 3. Front Panel LED Behaviors
Color
The unit is not receiving power.
The unit is receiving power.
The RPS is functioning properly.
The RPS has failed.
The EPS is functioning properly.
The EPS has failed.
The fans are functioning properly and the system temperature
is acceptable.
The fans have failed.
There is no connection to the switch.
There is a valid connection to the switch.
Power is not being provided to the associated port.
Power is being provided to the associated port.
A fault condition exists on the associated port.
There is no connection to the switch.
There is a valid connection to the switch.
Copyright © 2013 ADTRAN, Inc.
NetVanta 1131 RPS/EPS
AC universal power
supply. Refer
for connection details.
Indication
31
Advertisement
Table of Contents
