Table of Contents
Advertisement
Unit Installation
Installing a NetVanta ActivReach Media Converter
The NetVanta ActivReach Media Converter is designed to convert ADTRAN's ActivReach Ethernet to standard
10/100Base-T Ethernet over varying cable types and cable distances well beyond the standard Ethernet
limitation of 100 meters. It has no input power supply. It draws power from the upstream NetVanta 1535P
ActivReach Ethernet Switch. The ActivReach Media Converter has two RJ-45 connectors (labeled IN and
OUT) with built-in LEDs. Refer to
The NetVanta ActivReach Media Converter has two modes. The mode is selected by a sliding switch labeled
PoE and is dependent on the type of downstream device connected to the converter. With the sliding switch in
the ON position, the Media Converter provides PoE to the downstream device. With the sliding switch in the
OFF position, the Media Converter terminates the PoE from the upstream ActivReach Ethernet Switch.
Features and Specifications
Conversion
•
1-pair, 2-pair, or 4-pair ActivReach Ethernet to standard 10/100Base-T
Compliance
•
EN 60950-1
•
IEC 60950-1
•
AS/NZS 60950-1
•
UL/CUL 60950-1
•
FCC Part 15 Class B
•
EN 55022 Class B
•
EN 55024
•
EN 386 300
•
EN 61000-3-2
•
EN 61000-3-3
•
ICES 003 Class B
•
AS/NZS CISPR22 Class B
•
RoHS compliant (telecommunications exemption)
26
Table 2 on page 28
Figure 5. NetVanta ActivReach Media Converter
Copyright © 2013 ADTRAN, Inc.
NetVanta 1535P Hardware Installation Guide
for a description of LED behaviors.
61702595G10-34C
Advertisement
Table of Contents
