Hnb-Ps Network Configuration - Cisco ASR 5000 Series Administration Manual

HNB-GW Service Configuration Procedures
Notes:
<
tunnel over IuPS interface towards core network.
<
interface towards core network.
<
context must be used for GTP-U service configuration to provide GTP-U tunnel over Iuh interface towards
HNB.
<
interface towards HNB.

HNB-PS Network Configuration

Use the following example to configure the packet switched network parameters to be associated with HNB-GW service
on system:
Notes:
<
<
traffic through HNB-GW.
<
tunnel over IuPS interface for packet switched traffic towards PS-CN.
OL-22991-01
> is name of the destination context in which GTP-U service configured to provide GTP-U
> is name of the GTP-U service configuredto provide GTP-U tunnel over IuPS
> is name of the source context in which HNB-GW service is to be configured. The same
> is name of the GTP-U service configured to provide GTP-U tunnel over Iuh
> is name of the packet switched network to be associated with HNB-GW for PS call.
> is address of the SGSN in SS7 point code format to be used for packet switched
> is name of the GTP-U service configured in <
Cisco ASR 5000 Series 3G Home NodeB Gateway Administration Guide ▄
HNB GW Service Configuration ▀
> to provide GTP-U