Installing The Navigation Software - Medion Navigation Unit Manual

III. I
NSTALLING THE
You will be requested to install the Navigation Software during the
initial installation. Please proceed as follows:
1. Carefully take the memory card out of its packing. Take
care not to touch or dirty the contacts.
2. Push the memory card carefully into the SD-/MMC card bay
until it slightly lock in place.
3. Click OK to install the application.
The memory card must always be inserted in the device while the
navigation system is being used. It will be necessary to carry out
a Soft Reset to restart the navigation system if the memory card
has been removed, only for a short time, while the system was
being used (see page 25).
The main screen, through which you will be able to make the
navigation settings, will appear after all the data has been copied
to your navigation system.
Please also read the chapter Navigation starting on page 26.
N
AVIGATION SOFTWARE
I S -
NITIAL ET UP
19