Table of Contents
Advertisement
Set the recording end position, <PUNCH OUT>
7
Press the desirable position for
'PUNCH OUT'.
The PUNCH OUT setting
confirmed
→
PUNCH OUT
PLAY
REC
Start
the practical re-recording parts
HINT:
• You can make position setting for <PUNCH IN / OUT> using
counter while stopping. First set each time and move the
cursor to <PUNCH IN / OUT>, and then press [DIAL].
• During <PUNCH OUT> _ Step 7-, if you press [DIAL]
again, all the setting will be cancelled.
+
PUNCH OUT
PLAY
Stop
Re-recording
8
Rewind the file to the head
(Counter: 0) or to the position to
start re-recording 'PUNCH IN'.
9
Press TRACK [1], Recording Standby.
10
Press TRACK [1] [PLAYBACK _ RECORDING].
Only on MTR MODE
NOTE
Setting available on MTR
mode and <OVERWRITE>
recording.
[1] In a range of punch in and out
setting, the light on and outside of
the range the light blinks.
When reaches the recording start
position 'PUNCH IN': REC light on,
and automatically start recording.
[1] When reaches the recording
end position 'PUNCH OUT': [1]
light blinks=automatically end.
Appointing the time
☞
Ref.
P.102
using a counter
062
Advertisement
Table of Contents
