Table of Contents
Advertisement
6-09
Utility: How to use H2 and H4 SD cards
When you use the SD cards for H2 and H4 in the H4n, you can move their files and projects to
the H4n.
1
2
Insert SD card for H2/H4 unit into H4n and
boot up the unit.
Select MOVE FILES and
<YES>, and press.
it is displayed
for H4 as H4.
Start booting up
NOTE:
• The stereo files of H2/H4 and the projects of H4 will be
moved to the H4n stereo folders and MTR projects.
• After moving to H4n, those SD cards are not recognized in
H2/H4 unit.
• The projects move in turn from the youngest number 1 to
the new project in H4n.
• When the H4n has more than 1000 projects in the unit
after transfer, the unit says,
"Project Full ! " and stop moving.
• You must reduce the project
number in H4n and continue the
transfer.
HINT:
"File Name Exists!"
If there is the same file name in the moving folder, operate
<RENAME> work.
☞
Ref.
< FILE RENAME>
P.109
134
Advertisement
Table of Contents
