Zoom H4next Operation Manual page 55

[TEMPORARY STOP]
light blinks
Press.
blinks
Counter doesn't return back to 0.
[RECORDING AGAIN]
light on
Press.
Continue recording from the
position stopped on the same file.
HINT:
FILE NAME
On 4CH mode the input from
t h e b u i l t - i n a n d t h e e x t e r n a l
microphones is saved separately
as STEREO WAV FILE.
T h o s e 2 f i l e s a r e a l w a y s
administered as one pair and
named as followings depend on
the input:
[MIC] file: 4CH×××M.wav
INPUT [1] [2] file: 4CH×××I.wav
On screen 2 files noted 'M/I' at
one time.
* You cannot change the file name.
file name
<REC FORMAT> CHANGE
If you want change, operate before
recording.
NOTE:
While recording and playback, no <REC FORMAT> is
possible.
☞
Ref.
P.051
<REC FORMAT>
Mark setting P.096
<AUTO REC> P.065
<REC LEVEL AUTO> P.070
Mark
While the recording format is WAV,
if you press [REC] button during
recording operation, the mark is
put on the file and you can move
swiftly to the marked position
during playback.
When you pause, that becomes
the mark position.
P.052
<FILE NAME>
<METRONOME> P.079
<PRE REC> P.067
Mode change
P.038
054