Quick Bypass; Displaying Bypassed Zones - ADEMCO VISTA-20SE User Manual

BYPASSING PROTECTION ZONES (Continued)

Quick Bypass

Your system may allow you to easily bypass all open (faulted) zones without having to
enter zone numbers individually. Ask your installer if this feature is active.
1.
(Security Code)
2. BYPASS 07 F RONT
UPST AIRS BE DROOM
Typical bypass message
3.
DISARME D BYPASS
RE ADY T O ARM
Displaying
For determining what zones have been previously bypassed. Bypassed zones can be
Bypassed Zones
displayed only when the system is disarmed, and when the "Bypass" message shown
in step 3 above is displayed.
1.
(Security Code)
2. BYPASS 07 F RONT
UPST AIRS BE DROOM
Typical bypass message
BYPASS
+ 6 ENTER SECURITY CODE THEN PRESS BYPASS
Example: 7 2 9 6 then press the BYPASS key.
WAIT
In a few moments, all open zones will be displayed
along with the word BYPASS. Wait for these zones to
be displayed before arming. Arming the system before
zones are displayed eliminates all bypasses.
ARM AS USUAL
Arm the system as usual when the keypad displays the
"Ready" message.
BYPASS
+ 6 ENTER SECURITY CODE THEN PRESS BYPASS
Example: 7 2 9 6 then press the BYPASS key.
WAIT
In a few moments, all open zones will be sequentially
displayed along with the word BYPASS.
– 22 –