Quick Guide To System Functions - ADEMCO VISTA-20SE User Manual

FUNCTION PROCEDURE
Check Zones Press [ ]
Arm System Enter code
Press arming key desired
(AWAY, STAY, INSTANT,
MAXIMUM)
Disarm System Enter code
Press OFF [1]
Bypass zones Enter code
Press BYPASS [6]
Enter zone numbers to be
bypassed (use 2-digit entries)
Quick Bypass Enter code
Press BYPASS [6] and stop
Chime Mode ON Enter code
Press CHIME [9]
Chime Mode OFF Enter code
Press CHIME [9]
Test Mode ON Enter code
Press TEST [5]
Test Mode OFF Enter code
Press OFF [1]
QUICK GUIDE TO
SYSTEM FUNCTIONS
COMMENTS
Do this to view faulted zones when system not ready.
Do this to arm the system in the mode selected.
Do this to disarm the system and silences alarms.
Do this to bypass protection zones. Bypassed zones are un-
protected and will not cause an alarm if violated.
Do this to bypass all faulted zones automatically, if programmed.
Do this to turn on chime mode. Keypad will sound if doors or
windows are violated while system disarmed.
Do this to turn chime mode off.
Do this to enter test mode. Sounds alarm sounder and allows
sensors to be tested.
Do this to turn test mode off. System returns to normal mode.
– 38 –