Arming Perimeter Only (Stay) - ADEMCO VISTA-20SE User Manual

ARMING PERIMETER ONLY
Using the 3
Use this key when you are staying home, but might expect someone to use the
entrance door later.
STAY key
When armed in STAY mode, the system will sound an alarm if a protected door or
window is opened, but you may otherwise move freely throughout the premises. Late
arrivals can enter through the entrance door without causing an alarm, but they must
disarm the system within the entry delay period or an alarm will occur.
Close all protected perimeter windows and doors before arming (see CHECKING
FOR OPEN ZONES section). The green READY indicator (if present) on the keypad
should be lit if the system is ready to be armed.
1.
(Security Code)
2. ARME D
You can restart the exit delay at any time after arming in STAY mode by pressing the
key. This is useful if you wish to open the entry/exit door to let someone in after
arming the system and avoids having to disarm the system and then re-arm it again.
(With Entry Delay ON)
STAY
+ 3 ENTER SECURITY CODE THEN PRESS STAY
Example: 7 2 9 6 then press the STAY key.
S
T AY LISTEN FOR 3 BEEPS
The keypad will beep three times and will display the
armed STAY message. The red ARMED indicator also
lights.
– 15 –