Panic Keys - ADEMCO VISTA-20SE User Manual

(FOR MANUALLY ACTIVATING SILENT AND/OR AUDIBLE ALARMS)
Using
Your system may have been programmed to use special keys to manually activate

Panic Keys

panic functions. The functions that might be programmed are listed below. See your
installer for the function(s) that may have been programmed for your system.
Keys
Your installer
1 and
should note the
3 and #
functions that are
and #
are active in your
A*
system.
B*
C*
* May not be present on your keypad(s).
To use a paired key panic function, simply press both keys of the assigned pair at the
same time. If your keypad has lettered keys for panic functions, press the designated
key and hold down for at least 2 seconds to activate the panic function.
Types of Panic
A silent emergency sends an alarm signal
Alarms
to the alarm monitoring company,* but there
will be no audible alarms or visual displays.
An audible
* If your system is
emergency message to the alarm monitoring
connected to an
company* and sounds a loud, steady alarm
alarm monitoring
at your keypad and at any external sounders
company.
that may be connected (ALARM plus a zone
number is also displayed).
PANIC KEYS
Active Panic Functions
Zone
95
96
99
95
99
96
emergency sends an
– 24 –
Function
A personal emergency alarm sends an
emergency message to the alarm monitoring
company* and sounds at keypads, but not at
external sounders. (A L A R M plus a zone
number is also displayed)
A fire alarm sends a fire alarm message to
the alarm monitoring company* and uniquely
activates keypad and any external sounders
(FIRE plus a zone number is also displayed).