Backup To Usb Memory Stick - SecurityMan LCDDVR4 User Manual

BACKUP to USB Memory Stick

To backup to memory stick or thumb drive, in playback mode:
1. Use search query (Search:Playback above) to playback the file for backup.
2. Plug in a memory stick or thumb drive (fat 32 file formatted) into the USB port
located on the right side of the LCDDVR4.
3. Press the Menu/ESC button on the front panel, RC or right mouse click
anywhere on the playback screen to bring up the playback control window (as
illustrated above) to select the BACKUP button and then a BACKUP window will
appear as shown below.
IMPORTANT: After searching for an event to backup; DO NOT press the ▌▌
pause button, press the Menu/ESC button on front panel, RC or click on the
BACKUP button (step 3 above) so that the End Time in the picture above
still ticking forward. The difference between the Start Time and the End
Time is the total time to backup.
4. Next, hover (UP/DOWN button on front panel, RC or simply put the mouse
cursor over) the cursor over the End Time and then press SEL/EDIT button on
the front panel, RC or simply left mouse click on the End Time to increase the
time to backup. Notice the Size field will increase each time the End Time field
is selected or clicked on.
5. Next, hover down to USB Copy field and press SEL/EDIT button or left mouse
click on USB Copy to continue the backup process.
6. It will take a few seconds to calculate and read the USB memory stick and
then a Backup to USB window will appear as illustrated below.
Review the Start Time, End Time, Copy Size, and File Name (system gener-
ated and in VVF format) to be corrected (as shown above), then press or click
50