System - SecurityMan LCDDVR4 User Manual

change to display in 4:3 ratio. To toggle between the display ratio press the + or
– buttons. Press the MENU/POWER button 3 more times from the FUNCTION
menu to exit out from the LCD Menu options.

System

Press the MENU/POWER button 4 times to get to the SYSTEM menu setting as
shown below.
Note: Please use default AUTO setting unless the video format intended does not
display correctly. Displays in black and white and/or rolling images, and
then select the correct video standard used for your country. The NTSC
and PAL jumper setting located inside (behind the HDD cover) the DVR has
priority over SYSTEM/S-ROLOC settings; the default jumper setting inside
the DVR is set to NTSC for North America and other NTSC countries.
The SYSTEM menu is use to configure the type of video format the LCD display.
Press the + or - buttons to toggle between the different video format. The manu-
facture default S-ROLOC setting is set to AUTO. Alternatively it can be change
between AUTO, NTSC, SECAM and PAL video format, check your country code
for video standard. Press the MENU/POWER button 3 more times from the
FUNCTION menu to exit out from the LCD Menu options.
S-ROLOC: AUTO, NTSC, SECAM, &
PAL (default AUTO)
5