Channel; Display; Brightness; Contrast - SecurityMan LCDDVR4 User Manual

Camera menu consist of Channel, Display, Brightness, Contrast, Hue,
and Saturation.

CHANNEL

Channel is use to toggle between camera channels, ie channel 1, channel 2,
and etc for the purpose of adjusting and fine tuning the camera image. Channel
name 1, 2, 3, 4 cannot be change. Or, press the left and right arrow of the front
panel or remote control to change value respectively.

DISPLAY

Display can be use to turn ON (Default setting) or turn OFF the channel name
display. The channel names are channel identity used to identify each channel
by name or number; in this case the channel names are fixed by default. The
display default setting is set to ON. Or, press the left and right arrow of the front
panel or remote control to change value respectively.

BRIGHTNESS

Brightness is use to tune up and down the bright level of an image in the
selected channel. Click on the left red arrow to reduce the brightness level and
click on the right red arrow to increase the brightness level of the image. Or,
press the left and right arrow of the front panel or remote control to change value
respectively.

CONTRAST

Contrast is use to tune the depth and sharpness of the image. Click on the left
red arrow to decrease the contrast and click on the right red arrow to increase
the contrast of the image. Or, press the left and right arrow of the front panel or
remote control to change value respectively.

HUE

Hue is use to adjust the variety of color spectrum in the image. Click on the left
red arrow to decrease the color glow and click on the right red arrow to increase
the color glow in the image. Or, press the left and right arrow of the front panel or
remote control to change value respectively.

SATURATION

Saturation is use to adjust the purity of the colors in the image. Click on the left
red arrow to decrease the purity of a color. Or, press the left and right arrow of
the front panel or remote control to change value respectively.
25