Password/Password Setup - SecurityMan LCDDVR4 User Manual

PASSWORD/PASSWORD SETUP

System administrator login; from the main System menu hover down over to
Password and then press Select/Enter using the front panel, RC or left mouse
click to toggle the password setting ON (system default) or OFF. Notice that
Password Setup does not exist in the System menu under system administrator
login.
For Operator or Guest login; from the main System menu browse to Password
Setup and then press Select/Enter using the front panel, RC or left mouse
click to change the Operator or Guest login password as illustrated above.
A current password must be input first, follow by the new password and confirm
new password. If the current password and new password is inputted correctly,
the Password Changed window will appear to indicate password changes has
been made successfully.
If current password and/or new confirm password is incorrect, a Mismatch Pass-
word window will appear as shown below.
Press Menu/ESC button or right mouse click at anytime to cancel or exit out from
Password Setup window.
41