Table of Contents
Advertisement
HARD DISK SETUP
Select Hard Disk Setup from the System menu to get to the hard disk setup
windows as shown below.
OVERWRITE ENABLE
In Hard Disk Setup menu set Overwrite Enable to Yes (system default) to allow
the system to continue to record and overwritten the oldest data by the minute
when the hard disk filled up. Set the Overwrite Enable to No will stop the DVR
from recording when the hard disk filled up.
FORMAT HDD
When new hard drive is first installed into the LCDDVR4 system, the DVR initially
formatted the hard drive. Use Format HDD to reformat the hard disk only in
special cases such as slow system boot up, playback pixilated images, wants to
delete all the data, bad sectors, and etc. If this Format HDD is chosen, all the
video data stored in the hard disk drive will be deleted.
Warning: Formatting hard disk drive will delete all data in the hard drive and
deleted data cannot be recovered. The DVR system does NOT store the
recorded data file and does NOT have restore option.
37
Advertisement
Table of Contents
