Table of Contents
Advertisement
MENU SETUP & CONFIGURATION
To enter the MAIN SETUP MENU press the Menu/ESC button on the remote
control, front button panel or right-click button on the mouse and a login window
will appear as shown above. There are three Account/Password level;
the Admin account (highest, default), the Operator account, and the Guest
account (lowest). By default the system has the password set to ON which
require operator to input in a login name or account and a login password.
When the password is in the ON mode, after login if the system is idle for a
period of 5 seconds, a login name and a login password is require to be input in
again due to inactivity. The period of inactivity is automatically determined by the
DVR system.
The Admin (administrator) has full controls of the DVR system; setup login
name, password and accounts level for each account users. Only one system
Admin account per a system, a second Admin account cannot be created. Be-
sides the Admin account, up to 3 additional accounts can be created alternating
between Operator and Guest. Please reference Account Setup on page 39 for
more detail.
The Operator account can perform tasks similar to that of the Administrator
account except for the following restrictions; operator cannot alter or add users
account setup, operator cannot format the HDD, restricted from run firmware
update, and cannot load setup default setting. However, in Operator account
level has the privilege to change its own Operator password.
The Guest account has the least priority of all account levels, more restric-
tions, which limits to parameter value change and setup functionality. Guest
account level of operation is suitable for live video viewing and playback
purposes. Here are the list of privileges that Guest account level can do; [live
21
Advertisement
Table of Contents
