Table of Contents
Advertisement
From the main Setup menu browse down to Audio and press Select/Enter us-
ing the front panel, RC or left mouse click to access the Audio setup menu as
illustrated above. The Audio menu consists of Channel, Record, Mute and Vol-
ume. Select the channel/camera to setup audio configuration. Then set the Re-
cord to ON (require microphone device to be attached to the Audio Input of the
system, system default) for audio recording or OFF to disable audio recording.
Turn the Mute ON will mute live audio and switch Mute OFF (system default)
will turn ON live audio streaming. Mute works independently from Record ON/
OFF and will not affect audio recording if Mute is set to ON or mute. Next, adjust
volume for the speaker by moving the Volume leverage up or down (system de-
fault is 25%, (1/4)). The Volume controls both the live audio streaming and the
intensity level of sound recording. Press Menu/ESC button at anytime to exit out
from Audio setup window.
SYSTEM
From the main Setup menu browse down to System and press Select/Enter
using the front panel, RC or left mouse click to access the System setup menu
as illustrated below. The System menu contains Hard Disk Setup, Account,
Password, Keypad Tone, Time Set, Event List, PTZ Setup, F/W Upgrade,
and Load Setup Default. Notice System shown on the left in the bellow picture
contain Account information for Admin login vs. the picture shown on the right
which does not contain Account because of Operator/Guest login.
Left
Right
36
Advertisement
Table of Contents
