View Controllers; View All Devices - 2gig Technologies Go Control 2GIG-CNTRL2 Operation & User’s Manual

Advanced Setup
Advanced Toolbox (cont.)

View Controllers

The Control Panel can display each Z-Wave
controller programmed into the network.
Use the following steps to display the
controllers.
1. From the Advanced Toolbox Screen, press the
VIEW CONTROLLERS button.
2. Each programmed controller will be
displayed. Use the ↑ or ↓ arrows to scroll
the display if more than three controllers
are listed. The controller listings will show
the controller's name, manufacturer, and
network node number.
3. Press BACK to quit.

View All Devices

Use the following steps to display all the
devices programmed into the network.
1. From the Advanced Toolbox Screen, press the
VIEW ALL DEVICES button.
2. Each programmed device will be displayed.
Use the ↑ or ↓ arrows to scroll the display
if more than three devices are listed. The
controller listings will show the device's
name, type/id number, manufacturer, and
network node number.
3. Press BACK to quit.
18
View Controllers Screen
Z-Wave Devices Screen