Network Maintenance; Removing Devices - 2gig Technologies Go Control 2GIG-CNTRL2 Operation & User’s Manual

Removing Devices

When a device will no longer be used in the
home control network, it should be removed
(also called excluded) from the network so the
system will not try to communicate with the
missing device.
To remove one or more devices from the
network, use the following steps:
1. From the Toolbox Screen, press the REMOVE
DEVICES button. The Control Panel will display
"Discovering devices" and wait for a signal from
a device.
2. Press and release the program button on the
device. (This button may also be called "bind",
"learn", or may not be labeled.)
3. When the device is discovered, the display will
show "A device has been removed from the
network...".
4. Repeat Steps 2 and 3 for any additional devices
that need to be removed from the network at
this time.
5. Press BACK when fi nished.
These steps can be used at any time to remove
devices from the home control network.

Network Maintenance

Pressing the Device's Programming Button
Remove Z-Wave Devices Screen
PRESS Z-WAVE
DEVICE BUTTON
Removed device
Removed Devices Display
indication
15