Quick Install Guide - Billion BiPAC 7300GX Quick Install Manual

Billion 7300GX 3G/ADSL2+ Wireless Modem/Router Installation
1.1 Starting out:
Before you can establish an Internet connection through your Billion 7300GX
Modem/Router make sure you have the following:
1. A Computer or Notebook with an installed Network Adaptor (sometimes called
an Ethernet Adaptor, Network Card or NIC)
2. An ADSL or DSL service account and configuration information provided by
your Internet Service Provider (ISP). You should need only a User Name and
Password, but you can check with your ISP to see if you require any of the
other following configuration parameters to connect your Billion 7300GX
Modem/Router to the Internet :
a. ISP User Name and Password
b. VPI/VCI parameters
c. Multiplexing Method
d. Host and Domain Names
e. ISP Domain Name Server ( DNS ) Address
f. Fixed or Static IP Address.
3. A compatible 3G datacard for 3G connectivity with SIM card (see
www.billion.uk.com/compatible-3G.htm
your mobile service provider.
4. Username and Password and APN from your mobile service provider.
1.2 Steps for Connection:
The following are the steps to properly connect your Billion 7300GX Modem/Router:
1. Turn off your computer.
2. If you do not have an ADSL faceplate installed by your service provider, you
must ensure ADSL splitters (also called microfilters or filters) are fitted to all
telephone sockets in use.
3. Connect the supplied ADSL (RJ-11) cable from the splitter/filter of your chosen
telephone socket (or ADSL faceplate if you have one) to the DSL Port of your
Billion 7300GX Modem/Router.
4. Connect the yellow Ethernet cable (RJ-45) from one of the Ethernet ports of your
Billion 7300GX Modem/Router to the Network Adaptor in your computer.
5. Insert your 3G datacard with SIM firmly into the slot at the back of the
Billion 7300GX Modem/Router. Ensure any "flip-out" antenna is deployed.

QUICK INSTALL GUIDE

for a full list of compatible cards) from
3