Billion BiPAC 7300GX Quick Install Manual page 4

6. Connect the Power adaptor to the Billion 7300GX Modem/Router and plug the
other end into a Power outlet. Power up the unit.
7. Turn on your computer. Please allow up to 45 seconds for your Network Adaptor
to locate the Router. Please wait for the DSL light on the front of the router to turn
to solid – this may take up to 1-2 mins (see 3.1 Troubleshooting the connection).
8. You are now ready to configure your ADSL and Wireless connection for the
Billion 7300GX Modem/Router. All you need to do is to follow the instructions
that follow and enter your User Name and Password as supplied by your Service
Provider. No other changes should be necessary.
2.1 ADSL and Wireless Configuration:
1. Open Internet Explorer or your default web browser and type in
http://192.168.1.254 in the address bar (where you would normally enter the
web site address) as per the illustration below.
2. You will be presented with a user name and password prompt.* Simply enter
user name as admin, password as admin and click OK. This will take you to
the modem's Status page.
* If the user name and password prompt box does not appear make sure that any
firewall or anti-virus such as Trend Micro or Norton is disabled. Also ensure that your
Internet settings are correct. (In Internet Explorer go to Tools/Internet
Options/Connections and make sure "Never dial a Connection" is checked. Then
Click on the LAN settings and ensure "Automatically detect settings" is checked and
all other fields are blank. Then go to Tools/Internet Options/Security and return your
Security settings to "default". )
4