Hardware Overview; Quick Start Guide; The Front Leds; The Rear Ports - Billion BiPAC 7300GX Quick Start Manual

Quick Start Guide

Hardware Overview

The Front LEDs

The Rear Ports

Connect the
detachable antenna
Connect the supplied
RJ-11 cable to this
port when connecting
to the ADSL/telephone
network
2
Lights Green when
the power and
router system are
ready.
Lights when 3G
service is ready.
Connect your
computer to a LAN
port, using the
included Ethernet
cable
Push WPS button
to trigger Wi-Fi
Protected Setup
Lit green when the
wireless connection
is established
Lit when connected
to an Ethernet
device
Press it to reset
the device or
restore to factory
default settings
Connect the 3G
card bus data
card to this slot
Lit when successfully
connected to an ADSL
DSLAM connection.
Lit steady when there
is a PPPoA / PPPoE
connection
Connect the
supplied power
adapter to this jack
Power
ON/OFF
switch