Specifications - Renesas PC7501 User Manual

2.4 Specifications

Table 2.1 lists the specifications of the emulator PC7501.
Table 2.1 Specifications
Supported MCUs
Max. operating clock frequency
Emulation memory
Software break
Hardware break
Hardware break condition
Exception event detection
Real-time trace
Real-time RAM monitor
Execution time measurement
C0 coverage
External trigger input/event
output
Host machine interface
Connection to the target system By way of an emulation probe (optional)
AC supply voltage for emulator
unit
Power consumption
External dimensions *
Weight
Operating environmental
conditions
Storage environmental
conditions
Overseas standards
*1 Target-MCU-dependent. (For details, see an emulation probe user's manual.)
*2 Available memory and the required wait states depend on the target MCU. (For details, see an
emulation probe user's manual.)
*3 The number of user-settable hardware break points depends on the specifications of the
emulator debugger M3T-PDxxF.
*4 For details of the external dimensions, refer to "7.1 External Dimensions of the Emulator
PC7501" (P.43).
M16C Family (32/16-bit, 16-bit)
1
66.7 MHz *
The default is 4 MB *
64 points
3
16 points *
(Execution address/Bus detection/Interrupt/External trigger
signal)
- AND/OR/AND (same time)/State transition
- Pass count: 255 times
Access protect
- 256K cycles
- Trace data: Bus, external trigger, and time stamp
- Five trace modes: Break/Before/About/After/Full
- Can be recorded ON/OFF by events
- 4,096 bytes (256 bytes x 16 blocks)
- Data/Last access result
- Execution time between program start to stop.
- Maximum/minimum/average execution time and pass count of
specified four zones.
- Count clock: Equal to MCU Clock or 16 MHz
8,192 KB (256 KB x 32 blocks)
External trigger input (MCU-dependent-voltage CMOS level x8)
or event output (break x1, event x7)
- LPT parallel (ECP, EPP, Byte/compatibility and
Nibble/compatibility modes)
- USB (USB 1.1, full-speed)
- LAN (10BASE-T)
(For details, see emulation probe data sheets.)
Supplied from an included AC adapter (100 - 240 V, 50/60 Hz)
48 W maximum
4
Width: 433 mm, Depth: 140 mm, Height: 58 mm
740 g
- Temperature: 5° to 35°C
- Humidity: 20% to 80% (non-condensing)
- Dust and dirt: General office environment
- Temperature: -10° to 60°C
- Humidity: 0% to 90% (non-condensing)
- Dust and dirt: General office environment
- US EMI Standards: FCC part 15 Class A
- CE marking: EN55022 Class A, EN55024
15 / 46
2