Step 4: Attaching The Microphone - Sony NXCAM NEX-EA50UH Operating Manual

Step 4: Attaching the microphone

Attaching the microphone (NEX-
EA50UH/EA50EH/EA50H only)
Attach the microphone to the handle.
1
Attach the wind screen D to the
supplied microphone C.
2
Place the microphone C in the
microphone holder E with the
model name facing upward, close
the cover, and shut the clamp.
3
Connect the plug of the
microphone to the INPUT 1 jack
B.
Put the microphone cable into the cable
clamp A.
26
Using the accessory shoe
When attaching an accessory other than the
handle, attach the accessory shoe plate to
the accessory shoe.
To mount the accessory shoe
Mount the accessory shoe on the accessory
shoe mount as illustrated.
Accessory shoe plate
Accessory shoe
Accessory shoe plate
1 Lift the edge of the accessory shoe plate
and pull it in the direction opposite to
that of the arrow on the accessory shoe
plate and remove it from the accessory
shoe.
2 Place the accessory shoe as its
protrusions matches recesses of the
accessory shoe mount, then fix it to the
mount with four screws.
3 Insert the accessory shoe plate in the
direction of the arrow on the plate
surface until the end of the plate
engages the end of the shoe.
Accessory
shoe