Warning Indicators And Messages - Sony NXCAM NEX-EA50UH Operating Manual

Troubleshooting

Warning indicators and messages

Self-diagnosis display/Warning
indicators
When an error occurs, a warning indicator
appears on the LCD screen.
You can fix some problems associated with
the symptoms yourself. If the problem
persists even after you have tried a couple
of times, contact your Sony dealer or local
authorized Sony service facility.
C:04:ss
• The battery pack is not an
"InfoLITHIUM" battery pack. Use an
"InfoLITHIUM" battery pack (p. 123).
C:06:ss
• The battery pack is too hot. Replace the
battery pack, or remove the battery
pack and put it in a cool place.
C:13:ss
• Remove the recording media. After
installing them again, operate your
camcorder.
C:32:ss
• Remove the power source. Reconnect it
and operate your camcorder again.
E:ss:ss
• Try the steps 2 to 4 on page 107.
E (Battery level warning)
• The battery pack is nearly used up.
• Depending on the operation,
environment, or battery conditions, E
may flash, even if around 10% is
displayed as the battery remaining
figure.
(Warning indicator pertaining
to battery pack temperature)
• The battery pack is too hot. Replace the
battery pack, or remove the battery
pack and put it in a cool place.
(Warning indicator pertaining to
memory cards)
Slow flashing
• Free spaces for recording images are
running out. For the type of memory
cards you can use with your camcorder,
see page 31.
• No memory card is inserted (p. 31).
Fast flashing
• There are not enough free spaces for
recording images. Delete unnecessary
images (p. 75), or format the memory
card (p. 78) after storing the images on
other media (p. 104).
• The image database file may be
damaged (p. 79).
(Warning indicator pertaining to
memory card formatting)*
• The memory card is damaged.
• The memory card is not formatted
correctly (p. 78).
(Warning indicator pertaining to
incompatible memory cards)*
• Incompatible memory card is inserted
(p. 31).
- (Warning indicator pertaining
to the write-protect of the memory
card)*
• The write-protect switch is set to lock
position on the memory card.
• Access to the memory card was
restricted on another device.
115
Continued ,