Sony NXCAM NEX-EA50UH Operating Manual page 62

Assigning the functions to the ASSIGN buttons (Continued)
ASSIGN buttons
1
Press the MENU button B.
2
Select
BUTTON] with the SEL/PUSH
EXEC dial A.
62
(OTHERS) t [ASSIGN
3
Select the ASSIGN button to
which you want to assign a
function with the SEL/PUSH
EXEC dial A, then press the dial.
• [--------] appears if no function is assigned
to the ASSIGN button.
• If you selected [FOCUS TRANSITION],
select [YES] and jump to step 5.
4
Select the function that you want
to assign with the SEL/PUSH
EXEC dial A, then press the dial.
5
Select [OK] with the SEL/PUSH
EXEC dial A, then press the dial.
z Tips
• [FOCUS TRANSITION] is assigned to the
ASSIGN 4/5/6 buttons (p. 42). If you cancel the
assignment of [FOCUS TRANSITION], the
setting goes back to the previous setting.
• To cancel [FOCUS TRANSITION], select
[FOCUS TRANSITION] t [YES] in step 3
again.