Sony NXCAM NEX-EA50UH Operating Manual page 88

Press the MENU button t select
STEADYSHOT
Only when attaching the lens with
SteadyShot.
You can set the camera shake reduction in
movie mode.
B STANDARD (
Uses SteadyShot under relatively stable
condition.
ACTIVE (
Uses SteadyShot with more powerful
effect.
OFF ( )
Does not use SteadyShot. This setting is
recommended when you use a tripod.
b Notes
• [ACTIVE] can be selected only when recording
movies using a lens with optical SteadyShot
complying with [ACTIVE].
z Tips
• You can assign this function to an ASSIGN
button (p. 61).
STEADYSHOT
Only when attaching the lens with
SteadyShot.
You can set the camera shake reduction in
photo mode.
B ON ( )
Uses SteadyShot.
OFF ( )
Does not use SteadyShot. This setting is
recommended when you use a tripod.
z Tips
• You can assign this function to an ASSIGN
button (p. 61).
FOCUS TRANSITION
TRANSITION TIME
x
You can set the time to shift the focus.
88
)
)
(CAMERA SET) with the SEL/PUSH EXEC dial.
3.5sec, B 4.0sec, 4.5sec - 15.0sec
(0.5sec increments), 20.0sec, 30.0sec,
45.0sec, 60.0sec, 90.0sec
x START TIMER
You can set the time to start the transition
after the ASSIGN 5 or ASSIGN 6 button is
pressed.
B OFF, 5sec, 10sec, 20sec
x REC LINK
You can link the time you start recording
with the time focus shifts.
B OFF, FOCUS-A, FOCUS-B
b Notes
• [FOCUS TRANSITION] function is effective
only on the [EXEC] screen.
SPOT FOCUS
See page 41.
FACE DETECTION
See page 41.
FLASH SET
You can select the flash setting when
shooting photos with a compatible external
flash (sold separately).
FLASH
x
B AUTO
Flashes automatically when the camcorder
judges the lack of light warrants a flash.
[AUTO] cannot be selected when the
shutter speed or iris is set to manual.
ON
Flashes for every shot, regardless of
ambient light.
SLOW SYNC.
Flashes for every shot. This setting makes
not only the subject brighter, but also the
background.