Table of Contents
Advertisement
When detaching the XLR Adaptor
Unplug the connector plug of the XLR Adaptor from the Active Interface Shoe beforehand.
Detach the XLR Adaptor after having loosened the screw of the XLR Adaptor.
Attaching the microphone
Attach the wind screen to the microphone .
Unlock the stopper of the microphone holder and open the cover.
Align the convex part of the microphone with the concave part of the
holder, and then place the microphone into the holder. Close the cover and
lock the stopper securely.
Be sure to place the microphone with the model name (ECM-XM1) facing upward.
Connect the plug of the microphone to the INPUT1 jack.
Microphone holder
INPUT1 jack
Release lever
GB
1
Advertisement
Table of Contents
