Sony NXCAM NEX-EA50UH Operating Manual page 54

Useful functions (Continued)
Picture profile
number
PP1
PP2
PP3
PP4
PP5
PP6
These example settings are for movie mode.
When used in photo mode, adjust setting
values accordingly.
1
Press the PICTURE PROFILE
button A during standby.
2
Select a picture profile number
with the SEL/PUSH EXEC dial B,
then press the dial.
You can record with the settings of the
selected picture profile.
3
Select [OK] with the SEL/PUSH
EXEC dial B, then press the dial.
54
Example setting
Example settings of a
color tone with
[STANDARD] gamma
Example settings of a
color tone with [STILL]
gamma
Example settings of
natural color tone with
[ITU-709] gamma
Example settings of a
color tone that is faithful
to [ITU-709]
Example settings of
pictures recorded on
cinema color negative film
Example settings of
pictures screened with
cinema color print film
To cancel the picture profile recording
Select [OFF] in step 2 with the SEL/PUSH
EXEC dial B, then press the dial.
To change the picture profile
You can change the settings stored in [PP1]
through [PP6].
1 Press the PICTURE PROFILE button
A.
2 Select the PICTURE PROFILE number
with the SEL/PUSH EXEC dial B,
then press the dial.
3 Select [SETTING] with the SEL/PUSH
EXEC dial B, then press the dial.
4 Select an item to be adjusted with the
SEL/PUSH EXEC dial B, then press
the dial.
5 Adjust the picture quality with the SEL/
PUSH EXEC dial B, then press the
dial.
6 Repeat steps 4 and 5 to adjust other
items.
7 Select [ RETURN] with the SEL/
PUSH EXEC dial B, then press the
dial.
8 Select [OK] with the SEL/PUSH EXEC
dial B, then press the dial.
A picture profile indicator appears.