Charging Time - Sony NXCAM NEX-EA50UH Operating Manual

Step 2: Charging the battery pack (Continued)
After charging the battery
The charge lamp turns off (normal charge).
If you continue charging 1 more hour after
the charge lamp turns off, you can use the
battery a little longer (full charge).
Remove the battery pack from the AC
Adaptor/Charger when the charge is
completed.
To attach the battery pack
Press the battery pack against the back of
your camcorder and slide it in the direction
of the arrow.
z Tips
• You can check the remaining battery life with
the status check function (p. 69).
20
To remove the battery pack
Slide the POWER switch to OFF. Push the
BATT RELEASE (battery release) button
and slide the battery pack in the direction of
the arrow.
BATT RELEASE
button
To store the battery pack
If the battery pack is not in use for a while,
run down the battery and store it (p. 124).

Charging time

Approximate time (minute) required when
you charge a fully discharged battery pack.
Normal charge
Battery pack
time
NP-F770
NP-F970
b Notes
• The supplied battery pack is NP-F770.
• You cannot use the NP-F570 battery pack with
your camcorder.
On the battery pack
• Before changing the battery pack, slide the
POWER switch to OFF.
• The Battery Info (p. 69) will not be correctly
displayed under the following conditions.
– The battery pack is not attached correctly.
– The battery pack is damaged.
– The battery pack is worn-out.
Full charge time
250 310
365 425