Basic Settings; Language Selection - VDO Cyclecomputing C4 Instruction Manual

Should your computer not function properly after installing the battery or you want to reset it to
default values, push the AC-button on the rear of the housing.

4. Basic settings

Basic settings are settings crucial to data measuring and operating the computer. Such as
C1
language, wheel size(s), clock.
C2
C3
C4
Any SET procedure must be completed (menu question ?SET OK? gets
WATCH OUT:
accepted by pushing M). Should a SET procedure not be completed, any data entered is not
stored.

4.1 Language selection

In case you want to change the language at any time, proceed as described under chapter 3.
C1
C2
C3
C4
GB
63