Table of Contents
Advertisement
D
GB
F
I
4.6 Transmitter pairing
The speed and cadence signals (Option: Item no.
7702) will be transmitted digitally and encoded to
your computer. This technology is less prone to
problems than analogue transmission. This way,
when riding in a group there are no data overlaps
(cross talk). So that the computer acquires the
digital encodings from the transmitter, a pairing
must be made:
step 1 Place the computer into the handlebar
holder. The display for the speed and the cadence
now flashes. The flashing shows that the compu-
ter is looking for its transmitter.
step 2 Spin the front wheel or simply set off and
the computer acquires the digital encodings.
When the computer has found the transmitters
and has acquired the encodings (pairing), the
speed and cadence are shown on the display.
5. Basic settings
5.1 Setting the language
Using the
SETTINGS/SELECT.
Confirm with
You are now in setting mode
(pressing
you back to function mode).
Confirm with
40
X3DW
buttons, go to
M
.
for 3 seconds gets
C
to LANGUAGE SELECT.
M
.
ATTENTION: The time window for pairing is
5 minutes. If you do not start cycling during the-
se 5 minutes, no pairing takes place. Speed and
cadence are not displayed. The pairing
then has to be repeated:
Place the computer back into the handlebar
B
holder OR
press the buttons
C
B
Confirm with
ENGLISH SELECT OK? Confirm with
LANGUAGE SELECT DONE. The computer automati-
cally returns to the start menu SETTINGS/SELECT.
+
together.
M
to LANGUAGE ENGLISH.
.
M
M
.
VDO CYCLECOMPUTING
Hide quick links:
Advertisement
Table of Contents
