Twist-Click Mounting Of Computer On To Holder; Installing The 3V Battery (Type 2032) Into The Computer Head - VDO Cyclecomputing MC1.0 Instruction Manual

1.3 Twist-Click mounting of computer on to holder

GB
The Twist-Click mounting has been exclusively developed for the new line of VDO CYTEC computers. The VDO MC 1.0 also features the Twist-Click-System.
MC
1.0 The computerhead is put onto the handlebar and by a right turn of the computerhead (TWIST) fixed to the holder (CLICK).
It is just as easy to remove the computerhead from the handlebar holder. Slightly push the computerhead down, twist it to the left, remove computerhead
from handlebar holder.
Watch out: Please remove the computerhead from the handelbar holder when you intend not to use your bike for a longer period of time. (battery power)

1.4 Installing the 3V battery (type 2032) into the computer head

To save battery power, your VDO MC 1.0 comes with the battery not yet fitted. Prior to initial use the batteries will first have to be installed with the positve
pole on top.
Warning: Once the battery is installed your VDO MC 1.0 starts the set-up of display language (see also chapter 2.4 for details).
If you find the computer is not functioning properly after the battery is changed, push the AC-button (Auto Clear) on the rear side of the computer to reset.
4
P4
P5
P6
P7