Entering (Programming) The Wheelsize(S) - VDO Cyclecomputing MC1.0 Instruction Manual

2.5.2 Entering (programming) the wheelsize(s)

GB
Step 1: By pressing MODE 1 call TRIP DIST in your display.
MC
1.0
Step 2: Press MODE 1 for 3 sec. In the upper part of the display you see "WS1" and "KMH" or "MPH" flashing. The lower part of the display alternately
shows "ENTER MTRIC SYSTM" and "KMH" or "ENTER ENGL SYSTM" and "MPH".
Step 3: With MODE 2 you choose whether you want kilometers=KMH oder miles=MPH as a measuring unit.
Step 4: Once the conversion of KMH or MPH has been chosen, you proceed by briefly pressing (0.1 sec) MODE 1. The lower part of the display now
alternates "ENTER WHEELSIZE1" and 2155. The last number "5" flashing.
Step 5: With MODE 1 and MODE 2 you enter your measured wheelsize 1 (bike1). MODE 2 increases the flashing number MODE 1 jumps to the next number,
see set-up mode.
Step 6: Once you have entered the last number of wheelsize 1 and press the MODE 1 button, the computer automatically jumps to the setup mode for
wheelsize 2. The lower part of the display alternately shows "ENTER WHEELSIZE2" and 2000 with the last number "0" flashing.
Enter your wheelsize 2 as described in Step 5.
Step 7: Once you have entered wheelsize 2, press MODE 1 for 3 sec to exit set-up mode. The computer will return to displaying TRIP DIST.
Warning: Exiting setup procedure before having completely entered the precise wheelsize may lead to faulty readouts.
10
P10