Manual Operation Of The Stopwatch; Resetting Information To Zero - VDO Cyclecomputing MC1.0 Instruction Manual

2.9 Manual operation of the STOPWATCH

GB
Your VDO MC 1.0 features a manual stopwatch in addition to the ride-timer with automatic Start/Stop function. The manual stopwatch is counting up to
MC
19:59:59 HH:MM:SS There are two ways to call in the stopwatch and simultaneously start it:
1.0
Direct Start: By pressing M1 and M2 briefly the stopwatch is called in and started simultaneously. Starting downhill a brief pressing of M1 and M2 will do to
call in the stopwatch and start it at the same moment.
Delayed Start: By pressing MODE1 the stopwatch is called in. By then pressing MODE1 and MODE2 briefly the stopwatch is started. With the stopwatch
running you might as well call further information in your display. The stopwatch will keep running in the background. Display indication will show
that the stopwatch is running.

3. Resetting information to zero

By pushing MODE2 for 3 sec information / data is reset to zero.
Following trip data is simultaneously reset to zero:
TRIP DIST--RIDE TIME--AVG SPEED--MAX SPEED--TRIP ALTI--MAX ALTI--AVG CLIMB--MAX CLIMB
Following data may be individually reset to zero, if desired so:
NAVI GATOR
Call NAVI GATOR information in your display. Push M2 for 3 sec to reset this data to zero.
STOP WATCH
Call STOP WATCH information in your display. Push M2 for 3 sec to reset this data to zero.
TOTAL ALTI--TOP ELVTN--ODO TOTAL
These summarizing functions (total altitude climbed / highest elevation reached Total Odometer) are especially protected to unintended erasing / resetting.
These informations can only be reset by changing battery or by pressing AC-button on backside of computer.
14