Aerial Connection; System Connections - Sharp SD-AS10H Operation Manual

! Connecting the system connection cable
Connect the main unit and amplifier unit as follows.
Amplifier unit
To connect:
The plug is directional.
Connect it with the arrow
pointing at the screw.
To disconnect:
Pull the plug straight out
pressing the plug.
System
connection cable
How to remove side cover
Remove the side cover to connect the system.
2
1

Aerial connection

Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS
socket and position the FM aerial wire in the di-
rection where the strongest signal can be re-
ceived.
Supplied AM loop aerial:
Connect the AM loop aerial wire to the AM and
GND terminals. Position the AM loop aerial for
optimum reception. Place the AM loop aerial on
a shelf, etc., or attach it to a stand or a wall with
Screw
screws (not supplied).
Note:
Arrow
Placing the aerial on the unit or near the AC
power lead may cause noise pickup. Place the
aerial away from the unit for better reception.
1
Push
2 Unplug
Installing the AM loop aerial:
< Assembling >
Main unit
External FM or AM aerial:
Use an external FM or AM aerial if you require better reception. Consult your dealer.
When using an external AM aerial, be sure to keep the wire of the AM loop aerial
connected.
External FM aerial
05/3/17
FM aerial
Black
< Attaching to the wall >
Wall Screws (not supplied)
External AM aerial
15 m (49 feet)
7.5 m (25 feet)
Earth wire
Earth rod
SD-AS10H_SEEG_E.fm
SD-AS10H
ENGLISH
AM loop aerial
White
Amplifier unit
AM loop
aerial
E-14
TINSZA116AWZZ
D
F
S
V
I
N
P
E