Aerial Connection - Sharp SD-AT1000 User Manual

! Connecting speaker wires
Make sure to leave the AC power lead disconnected when connecting the
speakers.
To prevent accidental short circuit between
speaker wires to the speakers first then to the unit.
1
Connect the wires to the speakers.
Speaker terminals
Red
Label
Black
2
Connect the other end to the main unit.
Label
Speaker plug
Caution:
" The supplied speakers are exclusively for SD-AT1000H. Do not connect them
to other equipment, and do not connect other speakers to SD-AT1000H. It
may cause malfunction.
" Do not mistake the
and , and right and left terminals of the speaker leads. (The
right speaker is placed on the right when you face the unit.)
" Do not let the bare speaker wires touch each other.
" Do not stand or sit on the speakers. You may be injured.
" Insert the speaker plug fully with the rising side facing up.
" Hold the speaker plug when removing it from the main unit.
Pulling the lead may cause malfunction to the unit.

Aerial connection

Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS
socket and position the FM aerial wire in the di-
rection where the strongest signal can be re-
ceived.
and terminals, connect the
Supplied AM loop aerial:
Connect the AM loop aerial wire to the AM and
GND terminals. Position the AM loop aerial for
optimum reception. Place the AM loop aerial on
a shelf, etc., or attach it to a stand or a wall with
screws (not supplied).
Tube
Notes:
" Placing the aerial on the unit or near the AC power lead may cause noise pickup.
Place the aerial away from the unit for better reception.
" When static is still heard even after adjusting the position of the AM loop aerial, try
reversing the wire connections.
Installing the AM loop aerial:
< Assembling >
Plug in with the rising
side facing up.
External FM or AM aerial:
Use an external FM or AM aerial if you require better reception. Consult your dealer.
When using an external AM aerial, be sure to keep the wire of the AM loop aerial
connected.
External FM
Incorrect
FM aerial
< Attaching to the wall >
Wall
aerial
External AM aerial
15 m (49 feet)
7.5 m (25 feet)
Earth wire
Earth rod
03/3/14 SD-AT1000H_SEEG_E.fm
SD-AT1000H
ENGLISH
AM loop
aerial
Black
White
Screws (not supplied)
AM loop
aerial
E-10
TINSZ0943AWZZ
1
2
3
4
5
6
7
8