Using The Radio Data System (Rds) - Sharp SD-AS10H Operation Manual

1-bit digital home cinema with dvd
Table of Contents

Advertisement

Using the Radio Data System (RDS)

SD-AS10H
ENGLISH
RDS is a broadcasting service which a growing number of FM stations provide.
These FM stations send additional signals along with their regular programme
signals. They send their station names, and information about the type of pro-
gramme such as sports or music, etc.
When tuned to an RDS station, "RDS" and the station name will be displayed.
"TP" (Traffic Programme) will appear on the display when the received broadcast car-
ries traffic information, and "TA" (Traffic Announcement) will appear whilst a traffic
information is on air.
"PTYI" (Dynamic PTY Indicator) will appear whilst the Dynamic PTY station is
received.
"RT" (Radio Text) will appear whilst the unit receives the Radio text data.
You can control the RDS by using the remote control only.
E-39
! Information provided by RDS
Set the MODE 1/MODE 2 switch to MODE 2 and each time the DISPLAY button
is pressed, the display will switch as follows:
Station name (PS)
Frequency
When you are tuning in to a station other than an RDS station or to an RDS station
which sends weak signal, the display will change in the following order:
NO PS
NO PTY
! Notes for RDS operation
If any of the following events occur, it does not mean that the unit is
faulty:
" "PS", "NO PS" and a station name appear alternately, and the unit does not oper-
ate properly.
" If a particular station is not broadcasting properly or a station is conducting tests,
the RDS reception function may not work properly.
" When you receive an RDS station whose signal is too weak, information like the
station name may not be displayed.
" "NO PS", "NO PTY" or "NO RT" will flash for about 5 seconds, and then the fre-
quency will be displayed.
Notes for radio text:
" The first 8 characters of the radio text will appear for 4 seconds and then they will
scroll across the display.
" If you tune in to an RDS station which is not broadcasting any radio text, "NO RT"
will be displayed when you switch to the radio text position.
" Whilst radio text data is received or when the text contents change, "RT" will be
displayed.
05/3/17
SD-AS10H_SEEG_E.fm
Programme type (PTY)
Radio text (RT)
NO RT
FM 98.80 MHz
TINSZA116AWZZ

Advertisement

Table of Contents
loading

Table of Contents