Setting The Clock - Sharp SD-AS10H Operation Manual

Setting the clock

By setting the unit to the correct time, you can use it not only as a clock but also for
timer playback.
1
Turn on the unit, and press the TIMER/SLEEP/CLOCK button.
2
Within 10 seconds, press the or
select the date and time indicator and then
press the ENTER button.
3
Press the or button to adjust the year and
then press the ENTER button.
Set "Month", "Date", "Hour" and "Minute" in the
same way.
" The 24-hour display will appear.
(0:00 - 23:59)
" The time disappears after approx. 2 seconds.
To confirm the time display:
[When the power is off]
Set the MODE 1/MODE 2 switch to MODE 2 and press the DISPLAY (-DIMMER) but-
ton.
The time display will appear for about 5 seconds.
[When the power is on]
Press the TIMER/SLEEP/CLOCK button.
Within 10 seconds, press the or button to select the time.
The time display will appear for about 10 seconds.
Note:
Unplugging the unit or power failure will stop the clock setting.
Readjust the clock.
05/3/17 SD-AS10H_SEEG_E.fm
SD-AS10H
ENGLISH
button to
Date Month Year
Hour Minute
E-20
TINSZA116AWZZ
D
F
S
V
I
N
P
E