Aerial Connection - Sharp HT-X1H Operation Manual

! Connecting the system connection cable
32 Connect the main unit and subwoofer/amplifier unit as follows.
Subwoofer/
amplifier unit
Main unit
Aerial terminals

! Aerial connection

Supplied FM aerial:
Connect the FM aerial wire to the FM 75
OHMS socket and position the FM aerial
wire in the direction where the strongest
signal can be received.
Black
1
Supplied AM loop aerial:
Connect the AM loop aerial wire to the
AM and GND terminals. Position the AM
loop aerial for optimum reception. Place
2 the AM loop aerial on a shelf, etc., or at-
tach it to a stand or a wall with screws
(not supplied).
Blue
Note:
Placing the aerial on the system or near the AC power lead may cause
noise pickup. Place the aerial away from the system for better reception.
Installing the AM loop aerial:
< Assembling >
External FM or AM aerial:
Use an external FM or AM aerial if you require better reception.
Consult your dealer.
2 1
When using an external AM aerial, be sure to keep the wire of the
AM loop aerial connected.
AM loop
aerial
Blue Black
< Attaching to the wall >
Wall
External AM aerial
External
FM aerial
Earth wire
Earth rod
04/10/16 HT-X1H(H)E2.fm
HT-X1H
ENGLISH
FM
aerial
AM loop
aerial
Screws (not supplied)
15 m
7.5 m
E-16
TINSZA030SJZZ
8