Sharp SD-AS10H Operation Manual page 72

Connecting other equipment (continued)
SD-AS10H
ENGLISH
! Using other subwoofer
You can connect a subwoofer with an amplifier to the subwoofer pre output socket.
Amplifier unit
Audio cable
(commercially available)
Notes:
" No sound is heard from the subwoofer if an amplifier is not built in.
" When two subwoofers are connected, both subwoofers reproduce sound.
Changes in the speaker setting apply to both subwoofers (see pages 47, 48).
E-61
! Headphones
" Before plugging in or unplugging the headphones, reduce the volume.
" Be sure your headphones have a 3.5 mm (1/8") diameter plug and impedance
between 16 and 50 ohms. The recommended impedance is 32 ohms.
Subwoofer
" Whilst headphones are connected, sound is not produced from the speakers.
" You cannot use the surround feature with headphones.
(with a built-in amplifier)
To audio
input socket
05/3/17
Amplifier unit
SD-AS10H_SEEG_E.fm
Headphones
TINSZA116AWZZ