Checking The Shift Shaft; Checking The Stopper Lever; Installing The Shift Shaft - Yamaha XT660R Service Manual

SHIFT SHAFT
EAS00329

CHECKING THE SHIFT SHAFT

1. Check:
• shift shaft 1
• shift shaft pawl 2
Bends/damage/wear → Replace.
• shift shaft spring 3
Damage/wear → Replace.
EAS00330

CHECKING THE STOPPER LEVER

1. Check:
• stopper lever 1
Bends/damage → Replace.
Roller turns roughly → Replace the stopper
lever.
• stopper lever spring 2
Damage/wear → Replace.
EAS00331

INSTALLING THE SHIFT SHAFT

1. Install:
• shift shaft spring stopper
LT
2. Install:
• stopper lever 1
• stopper lever spring 2
shift shaft 3
•
_
NOTE:
• Hook the ends of the stopper lever spring
onto the stopper lever and the crankcase
boss 4.
• Mesh the stopper lever with the shift drum
segment assembly.
• Lubricate the oil seal lips with lithium-soap-
based grease.
• Hook the end of the shift shaft spring onto
the shift shaft spring stopper 5.
3. Install:
• shift pedal
Refer to "ADJUSTING THE SHIFT PEDAL"
in chapter 3.
5 - 62
ENG
22 Nm (2.2 m · kg, 16 ft · lb)
16 Nm (1.6 m · kg, 11 ft · lb)