Siemens Gigaset C470 IP User Manual page 136

Suffix
Line suffix that you have to add to the phone number of an outgoing call to allow the
account assigned to the suffix to be used as the sending account.
Example: if you dial 123456765#1, the connection will be made and billed through the
first VoIP account, regardless of the number you have assigned to your handset as the
send number and whether you press briefly/press and hold the talk key.
If you dial 123456765#0, the connection will be made via the fixed line network.
Status
The status of the connection will be shown for VoIP connections:
Registered
The connection is activated. The phone has been successfully registered. You can use
the connection to make calls.
Disabled
The connection is deactivated. The phone is not registering with the corresponding
account with the VoIP service. You cannot use the connection to make or receive calls.
Registration failed
Your phone was unable to register with the VoIP service, e.g. because the VoIP access
data is incorrect or incomplete or the phone is not connected to the Internet. There is
information about this in the section "Questions and answers" from page 163 onwards.
Active
You can use the option in the
connections. If a connection is deactivated, the phone will not register for this connec-
tion. The connection can be activated/deactivated by clicking directly on the option. The
change does not need to be saved.
To configure a connection or to change the configuration of a connection:
¤
Click next to the connection.
Edit
This will open a Web page where you can make the settings needed. More information is
available
u
in the section "Configuring the VoIP connection" on page 133 and
u
in the section "Configuring the fixed line connection" on page 139.
Configuring the VoIP connection
Open the Web page:
¤
Open the following Web page:
¤
Click Edit next to the VoIP connection that you want to configure or the configuration of
which you want to change.
This will open a Web page where you can make the settings that your phone needs to
access your provider's VoIP server.
The Web page always displays the following areas:
u
(page 134),
IP Connection
u
Auto Configuration
u
Personal Provider Data
/
Server not accessible
Active
Settings
(page 134),
(page 136).
Web configurator – configuring the telephone via a PC
column to activate (
¢ ¢
Telephony
Configuring telephone connections
) and deactivate (
Connections.
) VoIP
133