Registration Wizard - Siemens Gigaset DL500A User Manual

First steps

3. Registration wizard

Is started on Gigaset DX800A all-in-one and Gigaset DX600A ISDN.
The registration wizard helps you register handsets to the base.
Registration
No
Registration
Cancel
If the handset has been successfully registered on the base, you will see the follow-
ing display (for approx. three seconds):
Registration
26
?
Register a
handset?
Yes
Ð
Please register
your handset
Info
‰
Handset registered
Please note
Press the left display key
do not wish to register any handsets.
This closes the registration wizard and
the connection wizard is started
¢
( page 27).
¤
Press the display key
changes to registration mode.
¤
Start the registration on the hand-
set within approx. 60 seconds
according to the handset's user
guide.
Info
Press the display key
information about registering hand-
sets.
Once a Gigaset handset has been suc-
cessfully registered, it will change to
idle mode. The handset's internal name
is shown on the display (INT 2, INT 3
to INT 7).
§No§
, if you
§Yes§
. The base
§Info§
to display