Setting up the base
Setting the display
Setting the screensaver/slide show
You can display a screensaver when the base
is in idle status. It will conceal the calendar,
date, time and name.
If a screensaver is activated, the Screensaver
menu option is marked with ³.
¢
Ï Settings
¢
v
¢
Screensaver
The current setting is displayed.
¤
You can enter data in the following fields:
Activation:
Select On or Off.
Selection:
Select screensaver with r.
§Save§
Press the display key.
The screensaver is activated approx.
10 seconds after the display has changed
to idle status.
If the screensaver conceals the display,
briefly press the red end key T to show
the idle display.
Setting the brightness and time
control for the display backlight
You can set the brightness of the display on
your base and specify a timeframe during
which the display on the base is completely
deactivated e.g., at night (reactivates as soon
as a key is pressed).
¢
¢
Ï Settings
v
¢
Backlight
The current setting is displayed.
48
Display
Display
¤
You can enter data in the following fields:
Time Control
Prerequisite: The date and time have
already been set.
Select On or Off.
For Time Control = On:
Display off from:
Enter time in 4-digit format.
Display off until:
Enter time in 4-digit format.
Brightness:
Set the brightness of the display back-
light with r. You can select from five
brightness levels.
¤
Press the display key
Changing the handsfree/
receiver volume
You can set the handsfree volume and the
receiver volume, as well as the volume of a
connected wire-bound headset to five dif-
ferent levels.
In idle status
¢
¢
Ï Settings
v
¢
Call Volume
You will hear a test tone.
r
Set the receiver volume.
s
Scroll to the Speaker line.
r
Set the handsfree volume.
§Save§
Press the display key to save the
setting.
During a call
¤
Set the volume using the R and S
keys.
¤
§Save§
Press
if necessary to permanently
save the setting.
§Save§
.
Audio Settings