Siemens Gigaset DL500A User Manual page 13

First steps
2. Connecting the base to the telephone network
Underside of
the base
*) The LAN2 and FAX connections are not available for all devices (
1 Insert one end of the phone cable (
the housing.
Gigaset DX800A all-in-one:
– Use the 8 pin cable with 2 mini western jacks 8/8 if you want to connect the
phone to the ISDN network (
– Use the TAE connection cable with RJ11 jack to connect to the analogue fixed
line (
Your telephone automatically detects which line it is connected to. The
installation wizard will later prompt you to make the necessary settings for
the current connection (
2 Plug the telephone cable into the port marked with the symbol ] on the un-
derside of the base.
3 Then connect the phone cable to your phone connection (3a ISDN or 3b ana-
logue fixed line).
12
*)
¢
page 8, cable 7b).
¢
3a
1
*)
2
¢
page 8) from the rear into the recess in
¢
page 8, cable 7c).
page 16).
3b
¢
page 10)