Siemens Gigaset DL500A User Manual page 25

First steps
Entering user data for your VoIP account
You will now be prompted to enter your personal access data for your VoIP account.
The following are provider-dependent:
u
User Name, Authentication Name, Authentication Password
Please note ...
... when entering access data, it is case sensitive.
To switch between upper and lower case and digits, press the # key (several
times if necessary). You can see briefly in the display whether upper case,
lower case or digit input is selected.
Characters entered incorrectly can be deleted using the left display key below
Ñ. The character to the left of the cursor is deleted.
You can navigate within the input field using the control key r (left/right).
Provider Data
Authentication Name:
< C
Provider Data
Authentication
Password:
< C
24
¤
Using the keypad, enter the authen-
tication name that you received
from your VoIP provider.
Abc
¤
OK
Press the key under
display screen.
¤
Use the keypad to enter your
password.
Abc
¤
OK
Press the key under
display screen.
§OK§
on the
§OK§
on the