Siemens Gigaset DL500A User Manual page 21

First steps
2. VoIP wizard – making VoIP settings
Is started on the Gigaset DX800A all-in-one.
You will see the following display:
Before you can use the Internet (VoIP) to phone any other numbers on the Internet,
the fixed line or the mobile phone network, you need the services of a VoIP provider
who supports the VoIP SIP standard.
Prerequisite: You have registered with a VoIP provider (e.g., via your PC) and set up
at least one VoIP account (IP account).
To use VoIP, you now need to enter the access data for your VoIP account. You will
receive all the necessary data from your VoIP provider. This will include:
Either:
u
Your user name (if required by VoIP provider)
The user name of your IP account (caller ID), frequently identical to your phone
number
u
Your authentication name or login ID
u
The (login) password registered with the VoIP provider
u
General settings for your VoIP provider (server addresses etc.)
Or:
u
An auto-configuration code (activation code)
Your Gigaset phone's VoIP wizard can help you make these entries.
Please note
You can configure up to six VoIP connections. In the phone setup process (no
VoIP connection has been configured yet), you configure one VoIP connection.
You can configure additional VoIP connections later with the VoIP wizard or
with the Web configurator.
20
IP Wizard
?
Start IP
installation wizard?
No Yes