Siemens Gigaset DL500A User Manual page 23

First steps
You will see the following display:
Your VoIP provider has supplied you
with an authentication name/pass-
word and, where applicable, a user
name:
¤
Press the key below
display screen.
¤
For further information, please see
"Downloading VoIP provider data"
on page 23.
Entering the auto configuration code
IP Wizard
Activation code for
Auto Configuration:
f
< C
All data necessary for VoIP telephony is loaded directly from the Internet to your
phone.
When all the data has been successfully loaded onto your phone, Your IP account
is registered with your provider. appears on the display.
¤
For further information, please see "3. Registration wizard" on page 26.
22
IP Wizard
?
Do you have a code
for Auto
Configuration?
No
You have received an auto configura-
tion code (Activation Code) from your
VoIP provider:
¤
§No§
on the
¤
¤
g V
OK
¤
Yes
§Yes§
Press the key below
display screen.
For further information, please see
"Entering the auto configuration
code" on page 22.
Using the keypad, enter the auto
configuration code you received
from the provider (max. 32 charac-
ters).
§OK§
Press the key below
display screen.
on the
on the